RT10 Verification Tone
Last modified date: 2015/04/20 Views: 1363
Description

To find the best possible location for the repeater, you may need to try various locations.

Place a call and walk around with the handset to determine the base station’s coverage area. The verification tone allows you to easily check the extent of the repeater’s coverage area. The tone is audible on the handset during a call. Given below steps is how to activate or deactivate the verification tone on the repeater.


Resolution

To activate the verification tone on the repeater:

1. Switch off the repeater (disconnect the power adapter).

2. Switch it on for 1 to 5 seconds and switch it off again.

3. Switch it on again. The LED indicator on the repeater flashes slowly.

4. Switch it off again.

5. Switch it on again.

The verification tone is then activated.

 

Place a call using the handset to check whether the handset is working in the extended area of the repeater. If the call is successfully handled by the repeater, you can hear the verification tone from the handset every few seconds.

To deactivate the verification tone, repeat the above steps.


More Information

For more information you can refer to below RT10 User guide:

http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2015-3-9%2F3%2F44c65347-052f-43ef-8756-5df46e9c1ca3%2FYealink+DECT+Repeater+RT10+User+Guide.pdf

Product Type
Yealink DECT Repeater RT10
Version
All
200/200
Please login to post your comment