【Multi-Cell】How to register handset on W80 DM
Last modified date: 2020/11/16 Views: 71
Description

 How to register handset on W80DM


Resolution

1.       Register Directly.

Go to W80DM web portal, under ‘’Handset & AccountàHandset Registration’’, click ‘’Add Handset’’, and click ‘Start Register Handset’.

image.png


image.png

    Then do one of the following

    (1). Press OK > Register Handset and then select the desired base to register the handset.

    (2). Press OK > Settings > Registration > Register Handset and then select the desired base to register the handset.

    (3). On the W41P, navigate to Menu > Settings >Registration > Register Handset.

    Note: Default PIN code is 0000.

2.       Register through IPUI

There are three ways to obtain the IPUI code:

(1). Handset UI:

On the W56H/W53H handset, navigate to OK > Status > Handset > IPUI Code;

On the CP930W, navigate to Menu > Status > Phone Status > IPUI Code;

On the W41P, navigate to Menu > Status > Dongle Status > IPUI Code.

(2). Giftbox: Obtain it from the sticker label on the handset's giftbox.

(3). Shipping system: Check it in the shipping system.

    A: Manual mode:

Go to Web UI->Handset&Account->Handset Registration; Choose Add Handset

image.png

    Then you can see the following interface, then input IPUI code, then press OK to save it.

    

image.png

    Then do one of the following

    (1). Press OK > Register Handset and then select the desired base to register the handset.

    (2). Press OK > Settings > Registration > Register Handset and then select the desired base to register the handset.

    (3). On the W41P, navigate to Menu > Settings >Registration > Register Handset.

    Note: Default PIN code is 0000.

 

    B: Auto Provisioning

    There are two parameters can use to register handset through IPUI:

    handset.X.reg.enable=

    It enables or disables the registration status for handset X.

0-       Disabled

1-       Enabled

 

    handset.X.ipui= Value of IPUI

    It configures the IPUI code of handset X.

    Note: X is the handset ID. X=1-100.

3.       Handset Registration Center

    A: Registering Handsets Time-Controlled

(1). Access the web user interface of the DM.

(2). Navigate to Handset & Account > Registration Center.

(3). In the Registration Start Time field, enter the time when the next registration process should be started. Valid value: at least 1 minute later than the current time but no more than 24 days.

image.png


    (4). In the Registration Duration field, enter the duration that the DM should stay in registration mode. Default: 3 minutes.

    B: Registering Handsets at Once

    (1). Access the web user interface of the DM.

    (2). Navigate to Handset & Account > Registration Center.

    (3). In the Registration Duration field, enter the duration that the DM should stay in registration mode. Default: 3 minutes.

    (4).Click Start Now. The DM starts registration at once; Then click Confirm.

4. Deleting handset: Under ‘’Handset & AccountàHandset Registration’’ 


image.png


More Information

If there are any other questions, please feel free to contact with ticket.yealink.com.


Product Type
W80 Multi-Cell System
Version
V83 or higher
200/200
Please login to post your comment